The material lists below are stocked at our shop for online custom service or in house purchase. You can upload your design and simply request any type of material we stock below. If you cannot find the material you need, let us know as we are constantly updating this list.
Description: Birch plywood is our favorite material for laser cutting and engraving. Birch is flexible yet strong enough to be used in many structural or prototyping projects. Laser cutting birch normally produces a slight burnt edges. The burnt edges are more visible on the 1/4" sheet but not as visible on the 1/8" sheet. Every sheet of Birch plywood has its own unique grains so do not expect all engraving or cutting to be exactly the same, expect uniqueness and we hope you will enjoy this as much as we do!
Description: We stock laser cut and laser engravable acrylic sheets from 1/16" (1.5mm) to 1/4" (6mm). Laser cut acrylic gives a nice and smooth edges. Laser engrave acrylic also provides nice contrast except on solid color acrylic. Laser engrave and laser cut on mirrored acrylic needs to be done on the back (non-reflective side) of the sheet for better result.
Description: Just corrugated cardboard! These are perfect to test out your ideas. It is not as strong as birch or acrylic, but laser cut cardboard does hold up really well and has been used by many architectures to make prototype structures and products. Laser engraving cardboard provides a very interesting effect thanks to the corrugated pattern it has internally!